× Close Get a Quote

Share

Author: Michael Clifton

Can Someone Come to My House to Cut Granite? | Denver, CO

Yes, in some cases. A stone professional can come to your house for small finishing work, such as finishing a sink or range cutout, using a diamond blade kept wet to control dust. Full slab cutting, shaping and edge work are usually done in a fabrication shop, after your counters are measured and templated at home.

If you have a granite project under way in a Denver home, the question of who cuts the stone, and where, tends to come up early. Maybe a new sink or cooktop needs an opening, or maybe you have a slab in mind and wonder whether someone can simply bring a saw to your driveway and cut it there.

At Granite and Marble Designs, we fabricate granite in our own Denver shop and install it in your home, so we want to give you a clear picture of what can be cut at a house, what stays in the shop, and why the line falls where it does. The answer depends on which kind of cut you mean, and once that is clear, planning your project gets much easier.

In this guide, you’ll learn which granite cuts can happen at your house and which belong in a shop, why water and dust control decide where cutting is done, what happens during the house visit before any stone is cut, why cutouts and edges are best planned before fabrication, and why cutting granite yourself carries real risks. We finish with how our team handles each step, from your home to our shop and back again.

What Can Be Cut at Your House, and What Stays in the Shop

Small finishing cuts are the jobs most likely to happen at your house, while full slab cutting, shaping and edge work are normally done at a fabrication shop. In many cases, fabricators shape and finish the slab in their facility and may complete a cutout at the home so it matches the real dimensions of the space, which is often described as a hybrid approach.

The word “cut” covers quite different jobs, and that is why the answer is yes for some work and no for the rest. A whole slab is large and heavy, and turning it into countertop pieces is fabrication work that normally happens in a shop. A sink or range cutout is smaller, and it can be made on a CNC router in a shop or by hand with an angle grinder and a diamond blade, cut wet. Finishing a cutout so it matches the measured space is the kind of work some fabricators do at the home.

JobUsually done at your home or in the shopWhy
Cutting a full slab into countertop piecesIn the shopSlab cutting and shaping are part of fabrication, which normally happens at a fabrication facility
Shaping edge profilesIn the shopEdge work is part of fabrication, which normally happens at a fabrication facility
Sink and range cutoutsIn the shop or at the home, depending on the fabricatorCutouts can be made on a CNC router in a shop or by hand with an angle grinder and diamond blade, cut wet
Finishing a cutout to real dimensionsSometimes at the homeSome fabricators finish cutouts on site so they match the measured space

If you want to see what a full slab looks like before it is ever cut, you can see slabs in person on Pecos Street and picture how your pieces might be laid out. And if someone offers to cut granite at your house, it helps to ask which of these jobs they mean, because the tools, the mess and the dust risk all change with the size of the cut.

Why Water and Dust Control Decide Where Granite Gets Cut

Granite is cut with diamond blades, and those blades work better wet, which is a big reason most granite cutting happens where water and dust can be managed. A diamond blade is made to cut hard materials, and blade types exist for marble and granite. Water keeps the blade from overheating, greatly reduces harmful dust, clears away the slurry and helps the blade last longer.

Dust is the other half of the story. Cutting, sawing, grinding and drilling stone creates exposure to respirable crystalline silica dust, which is a recognised health hazard for the people who do the work. An angle grinder can give off a large amount of small respirable dust, and published estimates suggest that well-designed dust collection can cut dust concentration by roughly 80 to 90 percent.

ToolWhat it doesDust or water note
Diamond bladeCuts hard materials, with blade types made for marble and graniteWorks better wet: water limits overheating, greatly reduces harmful dust and clears slurry
Angle grinder with a diamond bladeCan be used by hand for cutouts and small cutsCan give off a large amount of small respirable dust, so it is used wet or with dust collection, which published estimates say can cut dust by roughly 80 to 90 percent
CNC routerCan make sink and range cutouts in a shopCuts wet, in a space built to handle water and slurry

A fabrication shop is set up to handle that water, slurry and dust every working day, while a kitchen or bathroom is not. That difference is the practical reason most of the heavy cutting stays in the shop and only small, careful cuts are made at a home, by someone with the right blade and a plan for the dust.

How the House Visit Works Before Any Granite Is Cut

The visit that does happen at your house is usually for measuring and templating, so your granite can be cut in the shop to the measured size of your space. The template then guides the slab layout and the cuts made afterward in the shop.

This is where much of the real answer to the question sits. Someone does come to your house, but the job on that visit is to measure and plan the cuts rather than to make them, which keeps most of the dust, water and slurry out of your home. When the pieces arrive for installation, they have already been cut, shaped and given their edge profile, and only finishing work on a cutout, where it is needed, happens on site.

Here is how the stages of our process divide between your home and our shop, so you can see where the cutting actually takes place.

StageWhat happens at your homeWhat happens in our shop
Measuring and templatingYour space is measured and templatedThe template is used to plan the work
Engineering and slab layoutNothing at this stagePieces and cutouts are laid out on the slab
CNC fabricationNothing at this stagePieces are cut and shaped, with edge profiles, finishes and custom cutouts
Demolition and removalYour old countertops are taken outNothing at this stage
InstallationNew pieces are set, seams are joined and the granite is sealedNothing at this stage

Our stone countertop fabrication follows that order, so the cutting your granite needs is done on shop equipment and your home sees the finished pieces rather than the saw.

Why Cutouts and Edges Are Best Planned Before Fabrication

Cutouts, edge profiles and finishes are best settled before fabrication, because most of the cutting your granite needs happens in the shop, guided by the template made at your home. In many cases, fabricators shape and finish the slab in their facility and may complete a cutout at the home only so it matches the real dimensions of the space.

Planning ahead matters because of where the tools are. Sink and range cutouts can be made on a CNC router in a shop or by hand with an angle grinder and a diamond blade, cut wet, and edge work is part of fabrication, which normally happens at a fabrication facility. Any cutting done at a home still calls for a wet blade and dust control inside a finished space, which is why most of it is left to the shop.

That is why it helps to choose your sink, cooktop opening, edge profile and finish before engineering and slab layout begin, and to ask a fabricator how each of your cutouts will be handled. Larger changes are best planned before fabrication, so the shop can make each cut to the measured size of your space.

Why Cutting Granite Yourself Is a Risk

Cutting granite yourself is possible in a narrow sense, but it carries real risks, mainly from the silica dust that cutting releases, so we suggest leaving it to a stone professional. The two biggest concerns are that dust and the need for the right diamond blade, water and dust control on every cut.

The dust risk is the most serious. Cutting, grinding and drilling stone releases respirable crystalline silica dust, and an angle grinder used dry can give off a large amount of it. Stone professionals cut wet with diamond blades made for granite and use dust collection, and those habits exist because the dust is a recognised health hazard rather than a simple nuisance.

The second concern is the tooling. Granite is cut with diamond blades made for stone, kept wet to limit heat and dust, and edge work and most cutouts are fabrication tasks done on shop equipment. If your granite needs a cutout, the safer route is a stone professional who cuts wet with dust control, or a fabricator who makes the cut in a shop before the top is installed.

How Our Team Handles Granite Cutting for Denver Homes

At Granite and Marble Designs, the cutting happens in our own shop, and our visits to your house are for measuring, removal and installation. Our fabrication and installation are done in house rather than outsourced, and we do not run a mobile cutting service, so your granite is cut on our equipment before it ever reaches your home.

Stone Design Consulting: We help you choose the granite, the finish, the edge profile and the cutouts your sink and appliances need, so the plan is settled before any stone is cut.

Stone Fabrication: We handle engineering and slab layout, then CNC fabrication on SABERjet equipment, with custom cutouts, edge profiles and finish choices made in our shop.

Demolition and Removal: We take out your old countertops so the space is ready for the new stone.

Installation: We set the pieces in your home, join them with near-imperceptible seams and seal the granite as part of the install.

This order keeps the dust and slurry of granite cutting in a space built for it, while your home sees the templating visit, the removal and the finished pieces. If you are planning a granite project and want to know how each cut will be handled, talk to our team about templating and installing your granite.

Key Takeaways

  • A stone professional can come to your house for small finishing work, such as finishing a sink or range cutout. Full slab cutting, shaping and edge work are usually done in a fabrication shop.
  • Granite is cut with diamond blades that work better wet. Water limits overheating, greatly reduces harmful dust and clears away the slurry.
  • Cutting, grinding and drilling stone releases respirable crystalline silica dust, a recognised health hazard. That is why stone professionals cut wet or use dust collection.
  • The house visit that usually comes first is for measuring and templating. The template guides the slab layout and the cuts made later in the shop.
  • Cutouts, edge profiles and finishes are best planned before fabrication, so the shop can make each cut to the measured size of your space. Any cutting done at a home still calls for a wet blade and dust control inside a finished space.
  • Cutting granite yourself puts your health at risk because of the silica dust. A stone professional or a fabricator’s shop is the safer route for any cut.
  • Granite and Marble Designs cuts and fabricates granite in its own Denver shop and does not run a mobile cutting service. Its visits to your home cover templating, removal and installation.

Frequently Asked Questions

Can a sink cutout be made at my house?

It can be. Sink and range cutouts can be made by hand with an angle grinder and a wet diamond blade, and some fabricators finish cutouts on site. Many are made on a CNC router in a shop instead, which is how we make custom cutouts.

What tools are used to cut granite?

Granite is cut with diamond tooling. Common tools include diamond blades, an angle grinder fitted with a diamond blade for hand work and a CNC router for cutouts in a shop, with water used to control heat and dust.

Can you cut granite with a circular saw?

A saw only cuts granite well with a diamond blade made for stone, and the cut should be kept wet to limit heat and dust. Because cutting stone releases silica dust, granite cutting is safer left to a stone professional with the right blade and dust control.

Does cutting granite make dust?

Yes. Cutting, sawing, grinding and drilling stone all release respirable crystalline silica dust, and an angle grinder in particular can give off a large amount of small respirable dust.

Is granite dust harmful?

Respirable crystalline silica dust from cutting stone is a recognised health hazard for the people who do the work. That is the main reason to leave granite cutting to a stone professional with the right tools and protection.

Can I see granite slabs before anything is cut?

Yes. You can compare granite slabs at our showroom at 5676 N Pecos St Unit A in Denver before your project moves on to templating and fabrication.

Do you remove my old countertops before installing granite?

Yes. Demolition and removal is one of our services, so our team takes out your old countertops before the new granite is installed, as part of the same project.

Can edge profiles be cut at my house?

Edge profiles are part of fabrication, which normally happens at a fabrication shop. We shape your chosen edge profile in our shop, so the pieces arrive with the edge already finished and ready to install.

Does Granite and Marble Designs offer a mobile cutting service?

No. We cut and fabricate your granite in our own Denver shop. Our visits to your home are for measuring and templating, removing your old countertops and installing the new stone.

Does granite need sealing after it is installed?

Yes. Granite is a natural stone and needs periodic sealing, and sealing is part of our installation. Ask our team about care for your chosen stone when you plan your project.

Conclusion

Someone can come to your house to cut granite, but usually only for small finishing work, such as finishing a sink cutout, and only with a wet diamond blade and proper dust control. The larger work of cutting slabs, shaping pieces and finishing edges belongs in a fabrication shop, after your space has been measured and templated at home.

At Granite and Marble Designs, that is how we work: we template at your house, cut and fabricate in our own Denver shop, and come back to install and seal your granite. If you are planning new granite counters, call our team to talk through how your cuts will be handled.

Call 303-536-8808 to plan your granite cuts.

Compare granite slabs at our Pecos Street showroom.

Contact Us

Contact us today to refer a customer to Granite and Marble Designs.

Contact Us